Seat harness FALCON ASCENT by Petzl
Show product categoryShow all Petzl products
Product No.: 91160-91161
product description
Seat harness FALCON ASCENT by Petzl - is a lightweight seat harness designed for rescue operations and work involving rope ascent. Two-part ventral attachment point that fastens with an OMNI carabiner and provides greater efficiency when ascending a rope. The design is lightweight and comfortable, joining the slim, semi-rigid waistbelt and leg loops with 3D foam padding, which provides an optimal balance between low weight and comfort, as well as reduced bulk. The DOUBLEBACK PLUS self-locking buckles on the waistbelt and the FAST LT buckles on the leg loops allow for easy and quick donning and adjustment. The rear buckle allows a TOP CROLL L chest harness to be attached.
- Especially ideal for rescue operations and work involving rope ascent:
- Two-part ventral attachment point fastens with an OMNI carabiner (or RING OPEN gated ring) and allows connection of a CROLL ventral rope clamp
- Low position of the rope clamp makes it more efficient during rope ascents
- Webbing loops separate from the attachment point loops allow the installation of a PODIUM seat for greater comfort when hanging for long periods of time - Lightweight and comfortable:
- Semi-rigid, slim waistbelt and leg loops with 3D foam padding, providing optimal comfort/weight ratio and reduced bulk
- Textile side attachment points, for occasional use, limit bulk and weight - Ergonomic:
- Waistbelt equipped with self-locking DOUBLEBACK PLUS buckles for quick and easy adjustment
- Leg loops equipped with FAST LT buckles to facilitate donning and removing the harness
- Possible to convert lateral textile attachment points to metal attachment points using the RING2SIDE accessory
- Rear metal buckle allows a TOP CROLL L chest harness to be attached
- Five equipment loops: two large rigid ones in front for easy access to gear, three small flexible ones in back that will not interfere with wearing a backpack
- Two slots for CARITOOL tool holder - Material(s): Nylon, polyester, aluminum
- Ventral attachment point: Yes
- Lateral attachment points: Yes
- Rear attachment point on the waistbelt: Yes
- Certification(s): EN 813, EN 358, UKCA, EAC, ASTM F1772
References | C038EA00 | C038EA01 |
Color(s) | Black/Yellow | Black/Yellow |
Size | 1 | 2 |
Waist belt | 70-93 cm | 83-120 cm |
Leg loops | 47-62 cm | 50-65 cm |
Weight | 800 g | 830 g |
GPSR, Marking of the manufacturer
GPSR, Marking of the manufacturer
Name: Petzl Distribution S.A.SEmail address: international@petzl.com
Street: ZI Crolles, Cidex 105 A
Postal code: 38920
City: Crolles
Country: FR
Phone number: +33476920920
Economic operator
Name: Kanirope® GmbHEmail address: office@kanirope.net
Street: Zinkhüttenweg 1
Postal code: 44143
City: Dortmund
Country: DE
Phone number: +4923196349161