Industrial Climbing Helmets
In this category, you will find an extensive range of industrial climbing helmets (protection helmets) for fall protection, personal protective equipment against falls (also known as fall arrest PPE), workplace positioning, rope access techniques, rope climbing techniques, rigging, and high-angle rescue. Our offering is specifically tailored to the unique requirements and needs of the industry and includes both protective helmets according to EN 397 and EN 12492, as well as individual solutions for specific applications. For optimal protection of your head.
Whether in scaffolding construction, assembly, or general industrial environments - wherever work at heights is a daily occurrence, our industrial protective helmets are used. They not only comply with the EN 397 standard (helmet EN 397) but are also certified according to EN 12492, which requires a particularly high breaking strength of the chin strap.
Your safety at work is ensured by our protective helmets for work at heights, as they protect the head from impacts, shocks, and falling objects. They are an essential element of your personal protective equipment (PPE).
The choice of the appropriate climbing helmet depends heavily on the specific use and expected application area. Our helmet models differ, for example, in the design of the chin strap and in the presence or absence of ventilation openings. A ventilated helmet (EN 12492) does not offer protection against electrical voltage or splashes of molten metal, whereas a closed helmet (EN 397) does.
If an uncontrolled fall cannot be ruled out, a mountaineering helmet according to EN 12492 must be used. If an uncontrolled fall can be ruled out, an industrial protective helmet according to EN 397 is used. Therefore, two helmet types should be available for different application areas. To partially avoid this, there are helmets that fulfill both standards (EN 397 + EN 12492).
In addition, we offer a variety of additional protective equipment for your industrial protective helmet. This includes helmets with integrated visors that protect not only the head but also the eyes from injuries. These models are particularly recommended for work involving splashes of hot metal or dusty environments.
We also offer special forestry helmets, work helmets, and safety helmets. Each protective helmet in our range complies with the DIN EN 397 standards and is part of our PPE protective equipment.
| Protection Requirement | Helmets |
| Protection against falling objects | Vertik, Dynamo 397, Dynamo Hybrid, Combi Work, Combi Work Visier, Hard Hat, Vertex, Vertex Vent, Strato, Strato Vent |
| Ventilation openings for good helmet ventilation | Combi Work, Combi Work Visier, Hard Hat, Vertex Vent, Strato Vent |
| Protection against electrical hazards: Electrical insulation (up to 440 V AC) |
Dynamo Hybrid, Vertex, Strato |
| Protection against electrical hazards: Electrical insulation (up to 1000 V AC) |
Dynamo Hybrid, Vertex, Strato |
| Protection against splashes of molten metal | Dynamo 397, Dynamo Hybrid, Vertex, Vertex Vent, Strato |
| Protection against lateral deformation | Dynamo 397, Hard Hat, Vertex, Vertex Vent, Strato, Strato Vent |
| Very low temperatures (up to -40°C) | Dynamo 397, Dynamo Hybrid |
| Chin strap opens at 15 daN up to max. 25 daN (1) | Vertik, Dynamo 397, Combi Work, Combi Work Visier, Vertex, Vertex Vent, Strato, Strato Vent |
| Chin strap opens from a minimum of 50 daN (1) | Hard Hat, Vertex, Vertex Vent, Strato, Strato Vent |
(1) The Petzl helmets (Vertex, Vertex Vent, Strato, Strato Vent) feature a dual chin strap. This allows the user to adjust the chin strap's holding force to adapt the helmet to different work situations: work at height (EN 12492) and work on the ground (EN 397).
| Helm / Standard | EN 397 | EN 12492 | EN 397 + EN 12492 | EN 50365 |
| Vertik | X | |||
| Dynamo 397 | X | |||
| Dynamo Hybrid | X* | X | X* | X* |
| Combi Work | X | |||
| Combi Work Visier | X | |||
| Hard Hat | X | |||
| Vertex | X | X* | X* | X |
| Vertex Vent | X | X | X | |
| Strato | X* | X* | ||
| Strato Vent | X |
*with restriction(s) - Refer to the respective product description for details
Our range also includes models with special features. For example, there are work helmets suitable for working with electrical voltage, forestry helmets specifically designed for use in the forest, and safety helmets that provide protection for a wide range of activities.
Whether you need a chin strap with a breaking strength of more than 50 daN, are looking for a helmet without ventilation holes, or require a protective helmet with a visor - in this category, you will find the suitable helmet for your specific industrial requirements. All our helmets comply with high safety standards and are designed for durability and comfortable wearing.
Invest in your safety and that of your employees with an industrial climbing helmet for workplace protection from our range.
Choose a product below:
