Petzl Rope, Static Rope, Semi-Static Rope, Rope Cord
In this category you can order various static ropes or semi-static ropes with diameters of 10.5mm - 12.5mm, various reep cords with diameters of 4mm - 8mm, as well as the respective matching accessories from the French manufacturer Petzl. The products offered here are very suitable for a wide range of applications, e.g. work at height, rescue and recovery work, tree care and other vertical activities in commercial applications.
| Range of application | Article | Type of rope |
| Work at height | AXIS 11 mm | semi-static |
| Hard to reach areas | PARALLEL 10,5 mm | semi-static |
| Rescue operations | VECTOR 12,5 mm | semi-static |
| Treecare | FLOW 11,6 mm CONTROL 12,5 mm | semi-static |
| For long rope routes without the possibility of intermediate belays | RAY 11 mm | static |
| For locomotion by means of lead climbing technique | MAMBO 10,1 mm | dynamic |
| For making prusik knots and for setting up anchor points or pulley systems | SEGMENT 8 mm | technical cord |
| Reep cord for guiding an injured person during rescue or for pulling up loads | CORDELETTE 4, 5, 6, 7 mm | Reep cord (semi-static) |
| PARALLEL | AXIS | VECTOR | FLOW | CONTROL | |
| Range of application | For hard to reach areas | For work at height | For rescue operations | For treecare | For treecare |
| Rope length & color | 50 m (blue, yellow, orange, red, black, white) 100 m (blue, yellow, orange, red, black, white) 200 m (blue, yellow, orange, red, black, white) 500 m (white) | 50 m (blue, yellow, orange, red, black, white) 100 m (blue, yellow, orange, red, black, white) 200 m (blue, yellow, orange, red, black, white) 500 m (white) | 50 m (blue, yellow, orange, red, black, white) 100 m (blue, yellow, orange, red, black, white) 200 m (blue, yellow, orange, red, black, white) 500 m (white) | 35 m (green, orange) 45 m (green, orange) 60 m (green, orange) | 35 m (green, orange) 45 m (green, orange) 60 m (green, orange) |
| Rope Diameter | 10,5mm | 11mm | 12,5mm | 11,6mm | 12,5mm |
| Weight per meter | 75g | 82g | 111g | 102g | 115g |
| Material | Polyester, Nylon | Polyester, Nylon | Polyester, Nylon | Polyester | Polyester |
| Breaking load with a figure eight knot | > 15kN | > 19kN | 23kN | 15kN | 15kN |
| Breaking load with sewn end connection | 22kN | 22kN | 34kN | ||
| Breaking load with splice | 15kN | 19kN | |||
| Snapshot (with fall factor 0,3) | 5,2 kN | 5,2 kN | 5,7 kN | 5,2 kN | 5,2 kN |
| Falls with fall factor 1 | 12 | 10 | 15 | 8 | 8 |
| Construction | 32x hollow braid | 32x hollow braid | 32x hollow braid | 24x hollow braid | 24x hollow braid |
| Sheath proportion | 45% | 41% | 46% | 55% | 62% |
| Static elongation | 3,4% | 3,0% | 2,8% | 2,8% | 3,1% |
| CE | Yes | Yes | Yes | Yes | Yes |
| EN 1891 type A | Yes | Yes | Yes | Yes | Yes |
| NFPA 1983 Technical Use | Yes | Yes | |||
| NFPA 1983 General Use | Yes | ||||
| ANSI Z133 | Yes | Yes | |||
| EAC | Yes | Yes | Yes |
| MAMBO 10,1 mm | |
| Range of application | For locomotion by means of the lead climbing technique |
| Rope length & color | 50 m (turquoise, green) 60 m (turquoise, green) 70 m (turquoise, green) |
| Rope Diameter | 10,1 mm |
| Weight per meter | 65 g |
| Material | Polyamide |
| Snapshot | 8,5 kN |
| Falls with fall factor 1,77 | 7 |
| Construction | 40x hollow braid |
| Sheath proportion | 37 % |
| Static elongation | 8,5 % |
| Dynamic elongation | 34 % |
| CE | Yes |
| EN 892 | Yes |
| UIAA | Ja |
| SEGMENT 8 mm | |
| Range of application | For making prusik knots and for setting up anchor points or pulley systems |
| Rope length & color | 50 m (white) 100 m (white) 200 m (white) |
| Rope Diameter | 8 mm |
| Weight per meter | 43 g |
| Material | Polyester, Nylon |
| Breaking load with a figure eight knot | 10 kN |
| Breaking load with sewn end connection | 13,5 kN |
| Construction | 32x hollow braid |
| CE | Yes |
| EN 564 | Yes |
| NFPA 1983 Escape Use | Yes |
| Rope Diameter | 4 mm | 5 mm | 6 mm | 7 mm |
| Range of application | For guiding an injured person during rescue or for lifting loads | |||
| Color | Orange | Red | Green | Blue |
| Rope length | 120 m | 120 m | 120 m | 120 m |
| Weight per meter | 10 g | 15 g | 24 g | 31 g |
| Material | Polyamid | Polyamid | Polyamid | Polyamid |
| Tensile strength | 4 kN | 6 kN | 10 kN | 12 kN |
| CE | Yes | Yes | Yes | Yes |
| EN 564 | Yes | Yes | Yes | Yes |
CE conformity mark
By affixing this mark, the manufacturer confirms on his own responsibility that a product complies with all the relevant regulations of the European Union. It is to be understood like the technical passport of the product and is considered as a basic requirement for a sale within the European Economic Area. The CE conformity mark thus indicates that a product complies with the required directives and is officially certified. The number after the CE conformity mark indicates the certification body.
EN 892
Dynamic rope
Rope which, as a link in the belay chain, is capable of arresting the fall of a climber or mountaineer at a limited maximum impact force.
Single rope
Dynamic part of the belay chain capable of arresting the fall of a lead climber in the single strand.
Half rope
Dynamic part of the belay chain that, when used in pairs, can arrest the fall of the lead climber. Persons in the second ascent may be belayed with one half-rope.
Twin rope
A dynamic part of the belay chain which, when used in pairs and in parallel, can arrest the fall of the person in front.
-
The following markings are mandatory for the manufacturer to affix to the product:
- Manufacturer/trade name
- year of manufacture
- length specification
- Type of rope/diameter
- Graphic symbol for (single rope, half rope or twin rope)
- CE marking with 4-digit identification number
UIAA
This mark indicates that a product meets the requirements of the UIAA (International Union of Alpine Associations). It is a special mark for mountaineering products.
The purpose of this standard is to ensure that the equipment can fulfil its task according to the requirements and withstand the stresses that occur in the process. UIAA standards are closely based on EU standards (CE or EN or CEN respectively), but sometimes deviate slightly from them. The UIAA standards correspond to the EN standards in their basic requirements, but in contrast to the EN they are not binding.
EN 564
Rope cord
Pieces of cord or rope, consisting of core and sheath with a nominal diameter of 4 mm to 8 mm, which serve to absorb force and not energy.
-
The following markings are mandatory for the manufacturer to include on the drum or standard packaging:
- Word "Rope cord" and EN 564.
- Name of the manufacturer
- nominal diameter of the cord
- breaking load
- Number of pieces (if offered on drum and consisting of several pieces)
- year of manufacture
- CE-marking with 4-digit identification number
EN 1891 type A
Low elongation kernmantle rope
A rope used for personal safety. The core is generally the essential load-bearing element and usually consists of parallel elements drawn together and twisted in single or multiple layers, or braided elements.
Type A
Low stretch kernmantle ropes are used in the following activities for personal safety: rope assisted work including all types of workplace positioning and restraint. Also for rescue and also in caving.
-
The following markings are obligatory for the manufacturer to affix to the product:
- Reference to instructions for use
- Permanent marking on both outer ends of the rope
- A for shape A rope
- B for form B rope
- EN 1891 + year of issue
- Internal marking over the entire length (at least every 1000mm) with the following information:
- Manufacturer
- EN 1891 + year of issue and rope form A or B
- Year of manufacture
- Material specifications of the core-sheath rope
- CE marking with 4-digit identification number
EAC
With the EAC marking, the manufacturer, distributor or authorized representative declares that the product, which is placed on the market for the first time in the territory of the Eurasian Economic Union, complies with the applicable safety requirements specified in the Technical Regulations of the Eurasian Economic Union. If the conformity test is successful, then the products must be marked with the EAC conformity mark. EAC is an abbreviation for Eurasian Conformity. It is similar in content to the European CE mark.
ANSI
ANSI stands for American National Standards Institute - an organization that develops various standards for the American market. The ANSI standard regulates the requirements for connecting components for personal fall protection systems.
NFPA
NFPA stands for National Fire Protection Association and is a US standard for fire protection. NFPA publishes a comprehensive set of fire protection regulations (National Fire Codes) that are mainly used in the USA.
Choose a product below:
