Liros Offroad winch rope Dyneema ø10mm 30m for 4.3t winch

Liros Offroad winch rope Dyneema ø10mm for 4.3t winch - a high-strength line specifically designed to be installed in winches. Replacing the wire rope supplied with the winch has many advantages: The Liros winch rope is 40% stronger than the original wire rope and ten times lighter. The winch rope is completely ready for installation: At the end of the rope, away from the winch, a carabiner hook and two separate protective sleeves, adjustable in position, are attached. These sleeves protect the rope from chafing at any potential friction points. At the end near the winch, there is a special flat terminal for fixation on the drum and a heat-resistant protective braid that securely protects the last three meters of the winch rope, which always remain on the winch drum and are not unrolled.

• Material: Dyneema®
• Rope diameter: 10mm
• Construction: 12-strand braided
• Working elongation < 1%
• Hook breaking strength: 2.5t
• Rope breaking strength: 8500 daN
• Winch type: suitable for up to 4.3t winch
• Colour: carbon grey
• Extremely high breaking strength with the smallest diameter and lowest weight
• Optimal wire replacement
• Easy splicing
• High UV stability and abrasion resistance
• Available rope lengths: 30m, 40m, other lengths on request